Company Information

* Company
* Name
* Phone

Key Parameters for Compressor inquiry

Suction Pressure

Discharge Pressure

Flow Rate

Cooling Method

Suction Temperature (℃)
Discharge Temperature(℃)
Power Supply(V/HZ)
Control Requirements
Gas Medium
Additional Remarks (You can also send your datasheet to our email)

News

Chlorine Gas Compressor: Dry Chlorine, Wet Chlorine, and the Materials That Separate Them

Chlorine Gas Compressor: Dry Chlorine, Wet Chlorine, and the Materials That Separate Them

2026-10-12

Chlorine gas compressor design for dry and wet chlorine: material rules, oil-free sealing, stage limits, and the failure modes that decide the machine.

view detail
Gas Cylinder Filling Compressor: Sizing From Source Pressure to Fill Pressure

Gas Cylinder Filling Compressor: Sizing From Source Pressure to Fill Pressure

2026-10-09

How to size a gas cylinder filling compressor: suction pressure, stage count, fill pressure margin, and the data needed before a quotation.

view detail
Inert Gas Reciprocating Compressor Stage Design and Pressure Distribution

Inert Gas Reciprocating Compressor Stage Design and Pressure Distribution

2026-09-30

Reciprocating compressors for inert gas cover a wide pressure range through multi-stage design. Stage count, inter-stage pressure ratio, and cooling strategy determine efficiency, reliability, and capital cost.

view detail
Ultra-High Purity Nitrogen: Meeting 99.999% with Diaphragm Compressors

Ultra-High Purity Nitrogen: Meeting 99.999% with Diaphragm Compressors

2026-09-29

Electronics and metallurgical processes need nitrogen at 99.999% purity and above. The compressor is the most likely contamination source, because every moving part is a potential leak path. Diaphragm compressor design eliminates this exposure by isolating the process gas from all mechanical drive components.

view detail
Argon Compressors for Welding: Oil-Free Design Requirements

Argon Compressors for Welding: Oil-Free Design Requirements

2026-09-28

Argon for welding shields the weld pool from atmospheric gases. Any oil, moisture, or oxygen contamination carried over by the compressor compromises weld quality. Compressors for argon service must be oil-free by design, not by filter.

view detail
Helium Compression Systems: Leakage Control in Cryogenic Service

Helium Compression Systems: Leakage Control in Cryogenic Service

2026-09-11

Helium is the hardest inert gas to compress without loss. Its small atomic size and low viscosity mean standard sealing geometries leak within hours. Compressor design for helium must combine metal-to-metal seals, leak-tested assemblies, and recovery loops that capture any diffused gas.

view detail
Nitrogen Compression: Diaphragm vs Piston Compressor Selection Guide

Nitrogen Compression: Diaphragm vs Piston Compressor Selection Guide

2026-09-11

Selecting between a diaphragm compressor and a reciprocating piston compressor for nitrogen service depends on three variables: purity requirement, discharge pressure, and flow rate. This guide walks through the decision logic based on field-proven engineering practice.

view detail
High-Pressure Gas Compression: Safety Standards and Best Practices

High-Pressure Gas Compression: Safety Standards and Best Practices

2026-08-28

High-pressure gas compression is inherent to many industrial processes — from hydrogen refueling and specialty gas cylinder filling to petrochemical processing and gas injection enhanced oil recovery. Operating compressors at pressures of 200 bar, 500 bar, or even 1,000 bar introduces significant safety risks that must be managed through proper equipment design, operational procedures, and adherence to established safety standards.

view detail

Compressor Sealing Technology: Ensuring Zero Leakage in Industrial Gas Compression

2026-08-28

Sealing is one of the most critical aspects of industrial gas compressor design. In applications involving hazardous, toxic, flammable, or high-value gases, even minimal leakage can result in safety hazards, environmental violations, product loss, and equipment damage. Understanding the sealing technologies available and their appropriate applications is essential for engineers specifying compression equipment.

view detail
SF6 Gas Recovery and Compression in the Electrical Industry

SF6 Gas Recovery and Compression in the Electrical Industry

2026-08-22

Sulfur hexaoride (SF6) is a man-made gas widely used in the electrical power industry as an insulating and arc-quenching medium in high-voltage switchgear, circuit breakers, and transformers. Its excellent dielectric properties make it indispensable for equipment operating at voltages from 72.5 kV to 1,200 kV. However, SF6 is also one of the most potent greenhouse gases known, with a global warming potential 23,500 times that of CO2. As a result, proper handling, recovery, and recycling of SF6 have become critical environmental and regulatory priorities.

view detail