Company Information

* Company
* Name
* Phone

Key Parameters for Compressor inquiry

Suction Pressure

Discharge Pressure

Flow Rate

Cooling Method

Suction Temperature (℃)
Discharge Temperature(℃)
Power Supply(V/HZ)
Control Requirements
Gas Medium
Additional Remarks (You can also send your datasheet to our email)

China Hydrogen Chloride Compressor Factory: Suppliers of High-Purity Equipment for Corrosive Gas Management

Introducing our specialized equipment designed specifically for the safe handling of highly corrosive hydrogen chloride gas. Manufactured in China, our factory utilizes only the highest quality corrosion-resistant materials and cutting-edge sealing technologies. This ensures ultra-high purity of gases and operational safety, making it an ideal choice for suppliers in the electronic industry and high-end chemical sector. Trust our innovative solutions to provide reliable support for your demanding applications.

    Advantages of Hydrogen Chloride Diaphragm Compressor
    01

    Absolute Sealing, Safe Zero Leakage

    The static sealing design completely encloses the gas within the diaphragm head chamber without any dynamic sealing points, fundamentally achieving zero leakage of hydrogen chloride gas. This greatly ensures operator safety and environmental friendliness, meeting the most stringent environmental and safety regulations.

    02

    Ultra-High Gas Purity, No Contamination

    During the entire compression process, the process gas only contacts specially treated metal diaphragms and corrosion-resistant flow-wetted components, completely avoiding contamination from lubricating oil or sealing grease. This characteristic makes it ideal equipment for producing electronic-grade high-purity hydrogen chloride (purity > 99.999%) used in semiconductor etching processes, ensuring the quality of end products.

    Key Design Points for Hydrogen Chloride Diaphragm Compressor
    01

    Full Corrosion-Resistant Materials for Diaphragm Head and Flow-Wetted Parts

    All metal components in contact with hydrogen chloride, including the diaphragm chamber, cylinder head, gas valves, inlet/outlet piping, and flanges, must be made of corrosion-resistant alloys. The standard configuration is SS316L stainless steel, whose addition of molybdenum (Mo) significantly enhances resistance to chloride pitting and stress corrosion cracking (SCC). For applications with extremely high moisture content or harsh operating conditions, evaluation and selection of higher-grade nickel-based alloys are required.

    02

    Diaphragm Material and Structural Reliability

    As the core isolation component, the diaphragm must be made of a special alloy with excellent resistance to hydrogen chloride corrosion and high fatigue strength, such as Inconel 718. Advanced designs such as an embedded diaphragm head should be adopted structurally to simplify the sealing surfaces, reduce potential leakage points, and ensure sufficient cycle life. A diaphragm rupture alarm device must be provided; once the inner diaphragm is damaged, the system can promptly alarm and shut down safely.

    03

    Integrated Safety and Monitoring System

    The compressor skid integrates a high-efficiency inlet separator to strictly remove liquid water and particulates from the gas. Controlling the inlet moisture content is key to preventing wet corrosion. All exposed parts shall undergo surface anti-corrosion treatment to resist atmospheric corrosion. The system is equipped with comprehensive monitoring of pressure, temperature, and oil pressure, along with interlock shutdown functions to ensure safe operation within set parameters.

    Certificate
    EAC Certificate
    CE Certificate
    ISO Certificate
    ISO 2033 Certificate
    ATEX Certificate
    Model Selection
    Hydrogen Chloride Diaphragm Compressor - GZ Series
    ModelG70Z / G95Z / G110Z / G130Z Piston Stroke70mm ~ 130mm
    Max Piston Force10KN ~ 30KN Max Discharge Pressure70 MPa
    Flow Range1 ~ 500 Nm³/h Motor Power2.2KW ~ 30KW
    Crankshaft Speed420 rpm Cooling MethodWater / Air Cooled
    HCl Diaphragm Compressor - GV Series
    ModelG70V / G95V / G130V Piston Stroke70mm ~ 130mm
    Max Piston Force10KN ~ 30KN Max Discharge Pressure50 MPa
    Flow Range1 ~ 200 Nm³/h Motor Power2.2KW ~ 30KW
    Crankshaft Speed420 rpm Cooling MethodWater / Air Cooled
    HCl Compressor - GL Series
    ModelG110L / G130L Piston Stroke110mm ~ 130mm
    Max Piston Force20KN ~ 40KN Max Discharge Pressure100 MPa
    Flow Range10 ~ 1000 Nm³/h Motor Power7.5KW ~ 90KW
    Crankshaft Speed420 rpm Cooling MethodWater / Air Cooled
    High Purity HCl Compressor - GD Series
    ModelG110D / G130D / G150D / G180D / G210D Piston Stroke110mm ~ 210mm
    Max Piston Force20KN ~ 160KN Max Discharge Pressure100 MPa
    Flow Range30 ~ 2000 Nm³/h Motor Power22KW ~ 200KW
    Crankshaft Speed420 rpm Cooling MethodWater / Air Cooled
    G
    Diaphragm type compressor
    Z
    Piston stroke 70mm
    5
    Flow (Nm³/h)
    0.5
    Inlet pressure (barg)
    8
    Outlet pressure (barg)
    No. Model Cooling water Flow Inlet pressure Outlet pressure Dimensions L×W×H Weight Motor Power
    (L/h) (Nm³/h) (MPa) (MPa) (≈mm) (≈kg) (kW)
    1 GZ-5/0.5-8 500 5 0.05 0.8 1400×740×1240 700 2.2
    2 GZ-14/39-45 500 14 3.9 4.5 1000×460×1100 700 2.2
    3 GZ-60/30-40 500 60 3 4 1400×800×1300 750 3
    4 GV-11/1-25 500 11 0.1 2.5 1500×780×1080 850 4
    5 GV-12/2-150 1000 12 0.2 15 1600×776×1080 900 5.5
    6 GV-400/20-60 3000 400 2 6 2600×1800×1700 3000 30
    7 GL-140/0.5-1.5 2000 140 0.05 0.15 2600×1800×1700 3000 15
    8 GL-150/0.3-5 2000 150 0.03 0.5 3230×1770×2200 3000 18.5
    9 GL-60/0.05-4 4000 60 0.005 0.4 2800×1600×1800 3000 22
    10 GD-255/1.2-28 6000 255 0.12 2.8 3600×2200×1800 6000 55
    11 GD-280/0.25-10 8000 280 0.025 1 3800×2300×2000 4000 75
    12 GD-450/1-12 9000 450 0.1 1.2 3800×2300×2000 4000 90
    The equipment size and weight are for reference only, and the final design shall prevail.
    Case Study
    Hydrogen Chloride Compressor Project in Russia
    Russia
    Hydrogen Chloride Compressor Project in United States
    United States
    Hydrogen Chloride Compressor Project in Spain
    Spain
    Hydrogen Chloride Compressor Project in Kazakhstan
    Kazakhstan
    Frequently Asked Questions (FAQ)
    Q: Why is a diaphragm compressor the best choice for Hydrogen Chloride (HCl) compression?

    A diaphragm compressor utilizes a static sealing design with zero dynamic seal points, eliminating external gas leakage. Furthermore, the gas cavity is fully isolated from lubricating oil, ensuring ultra-pure, contamination-free gas transfer ideal for toxic, corrosive, and high-purity applications.

    Q: What materials are used to withstand harsh HCl corrosion?

    Standard flow-wetted components and gas heads utilize SS316L stainless steel enriched with molybdenum for resistance against chloride pitting and stress corrosion cracking. For core diaphragms, high fatigue strength alloys like Inconel 718 or premium nickel-based alloys are configured.

    Q: Can this equipment be used for electronic-grade high-purity HCl gas?

    Yes. Because the process gas only contacts specially treated corrosion-resistant metal surfaces with zero oil lubrication in the gas chamber, purity levels exceeding 99.999% can be safely preserved for semiconductor etching and microelectronics processes.

    Q: How does the safety system protect against diaphragm rupture?

    The compressor features an integrated multi-layer diaphragm rupture alarm device. If any diaphragm layer encounters damage, the safety monitoring system detects pressure deviation instantly, triggers an alarm, and executes an automated interlock shutdown.

    Q: Why is inlet moisture separation critical for HCl compressors?

    Dry HCl gas is significantly less corrosive than moist HCl. The integrated skid includes a high-efficiency inlet separator to eliminate moisture and particulate carryover, strictly protecting internal valves and diaphragm chambers from aggressive wet acid corrosion.

    Q: What cooling options and custom configurations are available?

    Both water-cooled and air-cooled options are available across the GZ, GV, GL, and GD series, with customizable discharge pressures up to 100 MPa and flow capacities from 1 to 2000 Nm³/h tailored to specific process conditions.